Snmp; The "Show" Commands - Siemens SIMATIC NET Configuration Manual

Network protocols

7.4 SNMP

Parameter
client-id
string
Result
The assignment is deleted.
Further notes
You configure the assignment with the
7.4 SNMP
This section describes commands of the Simple Network Management Protocol (SNMP).
7.4.1

The "show" commands

This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
324
Description
Keyword for a DHCP
client ID
Freely definable
DHCP client ID
static-lease
you can execute the "show" commands in every
do [command]
with the "show" command that you want to execute.
[command]
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Range of values / note
-
Enter the required designation.
command.
Configuration Manual, 10/2015, C79000-G8976-C351-05