Snmp View - Siemens SIMATIC NET Configuration Manual

7.4.2.22

snmp view

Description
With this command, you configure an SNMP view.
Requirement
● An SNMP group has been created
● The access to the group is configured with
● You are in the Global Configuration mode.
The command prompt is:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp view <ViewName><OIDTree>[mask<OIDMask>]{included|excluded}
[{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter
ViewName
OIDTree
mask
OIDMask
View type
Storage type
If optional parameters are not specified when configuring, the default values apply.
Result
The SNMP view is configured.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
snmp access
Description
Name of the SNMP view
Object ID
Keyword for the OID mask
Mask that filters access to the ele-
ments of the MIB tree
Specifies whether the filtered elements
are used or excluded
specifies whether the settings remain
following a restart:
Network protocols
7.4 SNMP
Range of values / note
max. 32 characters
Path information of the MIB tree
-
A series of " " and " " separated
0 1
by dots in keeping with the path
information of the MIB tree
(Default)
•
include
•
excluded
(volatile):
•
volatile
The settings are lost after a
restart
(non-volatile):
•
nonvolatile
The settings are retained after
a restart (default)
351