Configuration Start Screen - Siemens Sinamics S120 Function Manual

6.9.2

Configuration start screen

Image 6-15 Configuration start screen TM54F
The following functions can be selected in the start screen:
● Configuration
Opens the "Configuration" screen
● Inputs
Opens the "Inputs" screen
● Outputs
Opens the "Outputs" screen
● Drive group 1 ... 4
Opens the corresponding screen of drive group 1 to 4
● Copy parameters (only available online)
To copy the configuration to the second drive object (TM54F_SL), press "Copy
parameters".
● Copying parameters after download (only available offline)
With this function, Copy parameters (parameters are copied from processor 1 to
processor 2) can be selected offline. Copying of parameters is then triggered after the
next download. Execution of this function does not lead to an adjustment of the Safety
checksum.
Safety Integrated
Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6
6.9 Commissioning TM54F by means of STARTER/SCOUT
Commissioning
295