Profisafe Communication - Siemens Sinamics S120 Function Manual

6.10

PROFIsafe communication

Requirements for PROFIsafe c ommunication
The following minimum software and hardware requirements apply for the configuration and
operation of safety-oriented communication (F communication):
Software:
•
•
•
•
•
•
Hardware:
•
•
•
When using a SIMATIC F-CPU
1)
If SIMOTION SCOUT is used however, SP6 cannot be used
2)
As an alternative to Drive ES Basic, you can commission the communication using the GSD file.
3)
Not e
Required s oftware or hardware c omponents
If a single software or hardware component is either older than those specified in this
document or is missing, PROFIsafe can no longer be configured via PROFIBUS or
PROFINET.
Safety Integrated
Function Manual, (FHS), 07/2016, 6SL3097-4AR00-0BP6
SIMATIC Manager STEP 7 V5.5 SP1 or higher
S7 F Configuration Pack V5.5 SP5
S7 Distributed Safety Programming V5.4 SP5
STARTER V4.3 or SIMOTION SCOUT
Drive ES Basic V5.4 SP4
1)
Correct installation of the software
A control with safety functions (in our example, SIMATIC F-CPU 317F-2)
SINAMICS S120 (in our example, a CU320-2)
Correct installation of the devices
or higher
1)
or higher
1)
V4.2
2)
or higher
3)
Commissioning
6.10 PROFIsafe communication
311