Siemens Sinamics G120P Operating Instructions Manual page 139

14b. Enter the motor speed from the motor type plate.
15. Enter the current limit.
16. Select the type of the motor data identification.
17. Because a speed sensor is not supported, the screen
18. Because a speed sensor is not supported, the screen
19. Select the appropriate macro for your application. Once
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Individual digits or the complete value can be changed.
Change the input mode by pressing the navigation
wheel for a longer time.
Individual digits or the complete value can be changed.
Change the input mode by pressing the navigation
wheel for a longer time.
If the motor data identification has been activated, the
function will be started after the first ON command.
can be bypassed by pressing "OK" of the navigation
wheel.
can be bypassed by pressing "OK" of the navigation
wheel.
the macro has been selected, all inputs, outputs, com-
mand sources and setpoints for the software are con-
figured automatically.
For more information, see the chapter titled Pre-
assignment of inputs/outputs and wiring via p0015
macros (Page 124).
Commissioning
5.3 Commissioning with the IOP
139