Siemens Sinamics G120P Operating Instructions Manual page 326

Operation
6.10 Operation with the IOP
5.
6.
7.
8.
9.
326
When selecting a dimension unit that is different than
the default one, you must define the conversion from
one unit to the other.
Define the conversion factors to convert the units of
the Y1 axis.
Select the number of decimal places to be displayed.
Determine the value range of the Y1 axis.
If required, the other axis (right Y axis) can be config-
ured.
The settings are realized analogous to steps 3. - 7.
Specify the desired time interval for the displayed
trend view.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A