Installing Starter - Siemens Sinamics G120P Operating Instructions Manual

64-bit operating systems:
● Microsoft Windows 7 Professional SP1
● Microsoft Windows 7 Ultimate SP1
● Microsoft Windows 7 Enterprise SP1 (standard installation)
● Microsoft Windows Server 2008 R2 SP1
Note: The release of STARTER with Windows XP will no longer be possible in future
*)
STARTER versions.
STARTER setup is possible with native Windows versions with Asian languages only if the
Windows XP or Windows 7 software is an MUI version. The executability in a software
configuration other than the one above has not been tested.
Acrobat Reader V5.0 or higher is required to open the function diagrams in the online help.
Note
Requirements in conjunction with STEP7
If STARTER is used in combination with other STEP7 components, the prerequisites for the
S7 components shall apply.
5.4.1

Installing STARTER

STARTER is installed using the "setup" file on the customer DVD supplied. When you
double-click the "Setup" file, the installation Wizard guides you through the process of
installing STARTER.
Note
Installation time
The installation time depends on the computer performance and from where the software is
installed (e.g. DVD, hard disk, network). We recommend that you install the software from a
local data carrier.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Commissioning
5.4 STARTER commissioning tool
143