Siemens Sinamics G120P Operating Instructions Manual page 318

Operation
6.10 Operation with the IOP
System information
This option allows you to access parameters that contain sys-
tem information about the inverter.
Most of these parameters are displayed only as information
and cannot be changed.
Basic settings
This option allows you to access parameters that influence the
basic inverter settings.
These include, for example, parameters for data sets and unit
systems.
Inputs/outputs
When this is selected, you can access parameters that are
required to configure the following signals:
• Digital inputs
• Digital outputs
• Analog inputs
• Analog outputs
You can navigate through the various inputs/outputs and dis-
play their current configuration. If required, the parameter val-
ues can also be changed directly. The parameters of the
digital inputs are displayed in the example shown at the right.
Setpoint channel
This option allows you to access the following setpoint param-
eters.
• Motorized potentiometer
• Fixed setpoints
• Speed setpoint
• Jog
• Speed limitation
• Ramp-function generator
318
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A