Siemens Sinamics G120P Operating Instructions Manual page 161

Configuring the drive unit properties
Figure 5-22
⇒ Under Standard:, choose the appropriate standard for your motor,
whereby the following is defined:
● IEC motor (50 Hz, SI unit): Line frequency 50 Hz, motor data in kW
● NEMA motor (60 Hz, US unit): Line frequency 60 Hz, motor data in hp
● NEMA motor (60 Hz, SI unit): Line frequency 60 Hz, motor data in kW
⇒ Under Power unit application: If the load cycle "[1] Load duty cycle with low overload for
vector drives" is permanently set.
⇒ Click on Continue >
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Configuring the drive unit properties
5.5 Procedure for commissioning via STARTER
Commissioning
161