Siemens Sinamics G120P Operating Instructions Manual page 159

Selecting the control structure
Figure 5-20
⇒ Select the corresponding settings for the closed-loop control structure:
Control mode:
Depending on the selected control, you can select from one of the following open-
loop/closed-loop control modes:
● 0: V/f control with linear characteristic
1: V/f control with linear characteristic and FCC
2: V/f control with parabolic characteristic
4: V/f control with linear characteristic and ECO
7: V/f control with parabolic characteristic and ECO
20: Speed control (without encoder)
⇒ Click Continue >
Note
Decision criteria for the control type, see Chapter Vector control or V/f control (Page 356)
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Selecting the control structure
5.5 Procedure for commissioning via STARTER
Commissioning
159