Basic Information About The Drive System; Parameters - Siemens Sinamics G120P Operating Instructions Manual
Converter cabinet units 110 kw - 400 kw
Hide thumbs
Also See for Sinamics G120P:
- Instruction manual (100 pages) ,
- Technical manual (98 pages) ,
- Hardware installation manual (94 pages)
Table of Contents
Advertisement
Operation
6.2 Basic information about the drive system
6.2
Basic information about the drive system
6.2.1
Parameters
Overview
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and by specific attributes (e.g. read, write, BICO
attribute, group attribute, and so on).
The parameters can be accessed via the following means:
● PC with the "STARTER" commissioning tool
● Intelligent Operator Panel IOP
Parameter types
The following adjustable and display parameters are available:
● Adjustable parameters (write/read)
These parameters have a direct impact on the behavior of a function.
Example: Ramp-up and ramp-down time of a ramp-function generator
● Display parameters (read only)
These parameters are used to display internal variables.
Example: Momentary motor current
Figure 6-1
All these drive parameters can be read and changed via PROFIBUS or PROFINET using the
mechanisms defined in the PROFIdrive profile.
170
Parameter types
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Advertisement
Table of Contents
