History
When this option is selected, a list of all previous faults and
alarms as well as the associated time of occurrence is dis-
played.
The individual faults and alarms can be selected. When the
INFO or OK key is pressed, an explanation of the relevant
fault or alarm is displayed.
If the INFO, OK or Esc key is pressed again, the list of faults
or alarms is displayed.
Identification/maintenance
When this option is selected, the supported identification and
maintenance (I&M) data are displayed.
Two selection options are available:
• General information (I&M 0)
Technical information about the Control Unit to which the
IOP is connected, is displayed.
• Plant ID/location ID (I&M 1-4)
Information about the plant ID, location ID, installation date,
supplementary information and signature are displayed.
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Operation
6.10 Operation with the IOP
313