Siemens Sinamics G120P Operating Instructions Manual page 31

Explanation of the option short codes
Table 2- 2 Explanation of the option short codes
Line-side options
L00 Line filter for use in the first environment to EN 61800-3, category C2 (TN/TT sys-
tems with grounded neutral point)
L13 Main contactor
L01 Clean Power version with integrated Line Harmonics Filter
L26 Main circuit-breaker, incl. fuses
Motor-side options
L07 dv/dt filter compact plus voltage peak limiter
L08 Motor reactor
L10 dv/dt filter plus voltage peak limiter
Line-side and motor-side options
M70 EMC shielding busbar with PE busbar
Control Units
K96 CU230P-2 PROFINET Control Unit
K97 CU230P-2 PROFIBUS DP Control Unit
K98 CU230P-2 HVAC Control Unit
K99 CU230P-2 CAN Control Unit
Safety functions
L45 EMERGENCY OFF pushbutton installed in the cabinet door
L57 EMERGENCY OFF category 0, 24 VDC
L60 EMERGENCY STOP category 1, 24 VDC
L83 Thermistor motor protection unit (alarm)
L84 Thermistor motor protection unit (shutdown)
L86 PT100 tripping unit
Increase in degree of protection
M21 Degree of protection IP21
M23 Degree of protection IP23
M43 Degree of protection IP43
M54 Degree of protection IP54
Mechanical options
M06 Base 100 mm high, RAL 7035
M07 Cable compartment 200 mm high, RAL 7035
Other options
K74 Auxiliary power supply, 230 VAC
L19 Connection for external auxiliary equipment
L50 Cabinet lighting with service socket
L55 Cabinet anti-condensation heating
L62 Braking unit 50 kW / 200 kW
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Device overview
2.5 Type plate
Type Type
A C
✓ −
✓ −
✓ −
✓ ✓
✓ −
✓ −
✓ −
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ −
✓ −
✓ −
✓ −
✓ −
✓ −
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ −
✓ −
✓ ✓
✓ ✓
✓ ✓
31