Siemens Sinamics G120P Operating Instructions Manual page 314

Operation
6.10 Operation with the IOP
I/O status
When this option is selected, a list of the digital and analog
inputs and outputs of the inverter as well as their current sta-
tus is displayed.
This is only an information screen in which no changes can be
made.
Pressing the Esc key displays the previous menu again.
In the example shown on the right-hand side, the status of the
digital inputs is displayed.
Status communication
When this option is selected, the status of the fieldbus inter-
face as well as details for the data transfer settings (e.g.
length of the status and control words) are displayed.
In the example shown on the right-hand side, the status of the
PROFINET fieldbus interface is displayed.
314
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A