Siemens SINAMICS S120 Commissioning Manual page 132

Commissioning
4.5 Establishing an online connection to the drive
Checking the firmware consistency:
1. Check the firmware version on your memory card using the "General" diagnostics screen
form.
– Connect your PG/PC to a drive device using a LAN cable, and switch on the drive
– In your Startdrive project, open the "Online access" entry in the project navigation.
– Select the network interface of your PG/PC.
– Double-click "Update accessible devices".
– In the project navigation call the "Online & diagnostics" function for the displayed
2. Check the firmware version in the catalog information of the Control Unit in your current
Startdrive project.
– To do this, call the following menu: "Control Unit > Inspector
130
device.
The accessible participant is displayed with IP address in the project navigation.
participant.
Figure 4-37 Firmware version of the hardware
window > General > Catalog information".
Figure 4-38 Firmware version of the software
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0