Siemens SINAMICS S120 Commissioning Manual page 160

Commissioning
4.8 Basic parameterization of the drive objects
Supported browsers
You can display the content of the web server either on a PC/laptop screen, a tablet PC or a
smart phone. The web server integrated in SINAMICS S120 converters supports the
following browsers:
Commissioning device
PC
Tablet / smartphone
If the web server does not respond, or if buttons are inactive or are not labeled, although the
converter is not fully utilized with internal calculations, load the web server page again as
follows:
● With the PC via <F5>
● With the smart phone or tablet via
Setting or changing web server user accounts
☐
For SINAMICS S120, the rights of both user accounts "SINAMICS" and "Administrator" are
permanently predefined and cannot be changed by users.
The user "Administrator" has full access rights by default. However, the standard
"SINAMICS" user only has restricted access rights.
For web server user accounts, you can make the following settings in Startdrive:
● Enable or disable a "SINAMICS" or "Administrator" user.
● Create a password for a "SINAMICS" or "Administrator" user.
● Change the password of a "SINAMICS" or "Administrator" user.
● Delete the password of a "SINAMICS" user.
158
Operating system
Windows (from Version 7)
Note:
We recommend the use of Windows 10,
version 1803, dated April 2018 or later.
Apple iOS (from Version 12.0)
Android (from Version 4.4.4)
"Drive control > Parameters > Basic parameterization > Web server"
Supported browsers
Microsoft Internet Explorer (Version 11)
•
Microsoft Edge (Version 14)
•
Mozilla Firefox (Version 62)
•
Google Chrome (Version 69)
•
Note:
We recommend the use of Google Chrome
in the supported version 69.
Google Chrome (Version 69)
•
Safari (Version 12.0)
•
Google Chrome (Version 69)
•
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0