Deleting A Trace Configuration; Online Diagnostics; Overview - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
5.3 Diagnostics via Startdrive
5.3.2.10

Deleting a trace configuration

Preconditions
● There is an online connection to the drive unit.
● A trace is saved in the drive.
Procedure
Proceed as follows to delete a trace configuration in the drive:
1. Open a trace configuration in the drive (see Chapter "Creating or calling a trace
(Page 269)").
2. If required, activate the icon
3. Click on icon
A confirmation prompt opens.
4. To confirm the deletion, in the query, click on "Yes".
Or
1. In the project navigation, select one or several trace configurations in the drive
2. Call the "Delete" shortcut menu to delete the trace configurations in the drive.
A confirmation prompt opens.
3. To confirm the deletion, in the query, click on "Yes".
5.3.3

Online diagnostics

5.3.3.1

Overview

Description
In the diagnostics view, you are working in online mode and see the most important drive
information or make important basic settings.
Precondition
● There is a physical connection between the Ethernet interface of your PG/PC and the
Ethernet or PROFINET interface of your drive.
278
for monitoring.
to delete the selected trace configuration.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
/ .