Creating Or Calling A Trace - Siemens SINAMICS S120 Commissioning Manual

You can find an overview of the most important user interface elements of the trace function
in Chapter "User interface - trace function (Page 46)".
5.3.2.2

Creating or calling a trace

Traces in the form of trace configurations can be created in the project navigation. Trace
configurations that have been saved can be called and modified.
The following instructions describe how you create a trace configuration under the system
folder
Requirement
A drive has been configured that supports the trace function.
Creating a new trace
Proceed as follows to create a trace:
1. Double-click the "Add new trace" entry.
A new empty trace configuration is created for the drive. You must then configure the
details (see Chapter "Configuring a trace (Page 270)").
Figure 5-4
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
"Traces" - and how you display a trace configuration that has been saved.
Calling a new trace
Diagnostics
5.3 Diagnostics via Startdrive
269