Inserting The Drive Unit - Siemens SINAMICS S120 Commissioning Manual

4.7 Alternatively: Creating a project with a device configuration derived from the hardware
Figure 4-52
4.7.2

Inserting the drive unit

Precondition
You have created a project (Page 146) or have opened an existing project.
Inserting a drive unit via the project view
Proceed as follows to insert new drive units in the project view:
1. Double-click "Add new device" in the project navigation.
The dialog with the same name opens.
2. Click "Drives" to display the drives available.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Getting Started
Commissioning
147