Siemens SINAMICS S120 Commissioning Manual page 238

Commissioning
4.11 Configuring brake control
• p1224[0...3]
• p1225
• p1226[0...n]
• p1227
• p1228
• p1276
Open and close the brake
• p0855[0...n]
• p0856[0...n]
• p0858[0...n]
• p1216
• p1217
• p1218[0...1]
• p1219[0...3 ]
• p1220
• p1221
• p1277
• p1279[0...3]
Free blocks
• p1279[0...3]
Brake monitoring functions
• p1222
• p1223
Configuration, control/status words
• p1215
• r1229.1...11
• p1275
• p1276
• p1278
236
BI: Close motor holding brake at standstill
CI: Standstill detection threshold value
Standstill monitoring speed threshold
Standstill detection monitoring time
Pulse suppression delay time
Motor holding brake standstill detection bypass
BI: Unconditionally open holding brake
BI: Speed controller enabled
BI: Unconditionally close holding brake
Motor holding brake opening time
Motor holding brake closing time
BI: Open motor holding brake
BI: Immediately close motor holding brake
CI: Open motor holding brake, signal source, threshold
Open motor holding brake, threshold
Motor holding brake, delay, braking threshold exceeded
BI: Motor holding brake, OR/AND logic operation
BI: Motor holding brake, OR/AND logic operation
BI: Motor holding brake, feedback signal, brake closed
BI: Motor holding brake, feedback signal, brake open
Motor holding brake configuration
CO/BO: Motor holding brake status word
Motor holding brake control word
Motor holding brake standstill detection bypass
Brake control diagnostics evaluation
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0