Smc10/Smc20 Sensor Module Cabinet; Smc30 Sensor Module Cabinet - Siemens SINAMICS S120 Commissioning Manual

5.2.3.2

SMC10/SMC20 Sensor Module Cabinet

Table 5- 21 Sensor Module Cabinet 10/20 (SMC10/SMC20) – description of the LEDs
LED Color
RDY –
READY
Green
Orange
Red
Green/red Flashing
Green/ora
nge
or
Red/orang
e
5.2.3.3

SMC30 Sensor Module Cabinet

Table 5- 22 Meaning of LEDs on the Sensor Module Cabinet SMC30
LED Color
RDY –
READY
Green
Orange
Red
Green/red Flashing
Green/red Flashing
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
State Description, cause
off Electronic power supply is missing or outside permissible
tolerance range.
Continu- The component is ready for operation and cyclic DRIVE-
ous light CLiQ communication is taking place.
Continu- DRIVE-CLiQ communication is being established.
ous light
Continu- At least one fault is present in this component.
ous light
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
Firmware is being downloaded.
light 0.5
Hz
Flashing Firmware download is complete. Wait for POWER ON
light 2 Hz
Flashing Component recognition via LED is activated (p0144).
light
Note:
Both options depend on the LED status when module
recognition is activated via p0144 = 1.
Status Description, cause
Off The electronics power supply is missing or outside the per-
missible tolerance range.
Continu- The component is ready for operation. Cyclic DRIVE-CLiQ
ous light communication is taking place.
Continu- DRIVE-CLiQ communication is being established.
ous light
Continu- This component has at least one fault.
ous light
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
Firmware is being downloaded.
light 0.5
Hz
Firmware download is complete. The system waits for
light 2 Hz POWER ON.
Diagnostics
5.2 Diagnostics using LEDs
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
Remedy
–
–
–
Correct fault and
acknowledge
–
Carry out a POWER
ON
253