Transferring The Trace Configuration From The Drive To The Project - Siemens SINAMICS S120 Commissioning Manual

Exporting measurements
To export a measurement, proceed as follows:
1. Display the measurement in the working area (see Chapter "Creating or calling a trace
(Page 269)").
2. Click on icon
The "Save as..." dialog box opens.
3. Select a folder, file name and possibly a file type to save the measurement.
4. Click the "Save" button.
Importing measurements
To import a measurement, proceed as follows:
1. Select the
shortcut menu.
The "Open" dialog box is opened.
2. Select the file of the "*.ttrecx" file type with the measurement to be imported.
3. Click the "Open" button.
5.3.2.9

Transferring the trace configuration from the drive to the project

Preconditions
● An online connection has been established to the drive.
● A trace is saved in the drive.
Procedure
Proceed as follows to transfer a trace configuration to the project:
1. Open a trace in the drive (see Chapter "Creating or calling a trace (Page 269)").
2. If required, activate the icon
3. Click on icon
Result
The configuration is transferred as new trace configuration into the
A trace configuration with the same name in the system folder is overwritten.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
to export the selected measurement.
"Measurements" system folder and select "Import measurement" from the
for monitoring.
to transfer the trace configuration from the drive into the project.
Diagnostics
5.3 Diagnostics via Startdrive
"Traces" system folder.
277