Mitsubishi Electric Melsec Q Series Programming Manual page 471

12 ERROR CODE LISTS
Table 12.2 Motion error history device error information (Continued)
Signal name
Error code 16000 and later
Year/
month
Error
occur- Day/ The clock data at error occurrence (SD210, SD211, SD212) are set.
rence hour (BCD code, year in its lower 2 digits)
time
Minute/
second
Motion SFC control errors
Ver.!
: Refer to Section 1.3 for the software version that supports this function.
Description
• Error type is followings;
"2" : Error code stored in D12602+20n or
D12603+20n
"3" : Error code stored in D6+20n or D7+20n
"4" : Error code stored in D802+10n or D803+10n
"5" : Error code stored in D1122+10n or D1123+10n
(SV22 virtual mode switching method)
Error code stored in D13250+10n or
D13251+10n (SV22 advanced synchronous
control method)
Ver.!
"6", "40" : Error code stored in D8+20n
"41" Ver.! ,
Ver.!
"43"
QDS
"7" : Error code stored in SD517
"8" : Error code stored in SD504
"9" or "10" : -1
"11" : Error code stored in SD512
"13" or "14" : Error code stored in SD0
"15" : Error code stored in #8008+20n
QDS
Ver.!
"42" : Error code stored in alarm/warning number of
QDS
SSCNET /H head module monitor device
Ver.!
"44" : Error code stored in driver operation alarm/detail
QDS
number (hexadecimal display (First 2 digits:
Driver operation alarm, last 2 digits: Detail
number))
"50" or "51" : Error code stored in SD32
12 - 4
Conventional errors
QDS
QDS