Mitsubishi Electric Melsec Q Series Programming Manual page 545

APPENDICES
2)
3)
(3) Setting batch send (TCP/IP protocol) of multiple data
By using the format output string setting of TCP/IP protocol, image data after the
job is finished can be sent in a batch to the Motion CPU.
Set with the following procedure using In-Sight
1) Click the [Online] icon on the tool bar, and shift to the offline mode.
2) Click the [Communication] button under Application Steps to display the
Communications screen.
3) Click the [Add Device] button to display the screen of Device Setup.
4) Select "Other" for "Device".
5) Select "TCP/IP" for "Protocol", and click the [OK] button.
4)
5)
APP - 54

Explorer.
1)
<Screen: In-Sight R Explorer>