Mitsubishi Electric Melsec Q Series Programming Manual page 539

APPENDICES
(1) Ethernet Communication Line Setting
Set the parameters related to the vision system Ethernet communication.
(a) Vision System (camera) No. (Not necessary to set)
This number (1 to 8) is used by the vision system dedicated function to
identify the vision system.
(b) IP Address
Set the IP address set for each vision system.
(c) Port No.
Set the port number used for communication with the vision system.
Set the same number as the port number set for the vision system with

In-Sight Explorer.
1) For Telnet communication
Set the Telnet connection port number used to control the vision system
from the Motion CPU.
If this number is not set, the Telnet default port number (23) will be used.
2) For TCP/IP communication
Set the vision system's TCP/IP server port number used to batch send
the vision system job execution results with the format output string
setting of TCP/IP protocol.
This does not need to be set when not using the format output string
setting of TCP/IP protocol.
(d) User Name
Select a user from those set in the vision system to be used when executing
the vision system dedicated functions.
POINT
Select a user name for which the access level is set to "Full Access" or "Protect" in

the In-Sight Explorer user list.
(e) Password
Set the password corresponding to the set user name.
APP - 48