NEC Electra Elite IPK II Programming Manual page 149

Document Revision 1
Item
No
06
07
08
09
10
11
12
13
14
15
2 - 114
Item
Extension Polarity Reverse
-- Not Used in U.S. --
Do Not Change Default Entry as DTMF issues
may arise with voice mail.
Enabled On-Hook When Holding (SLT)
Answer On-Hook when Holding (SLT)
Caller ID Function - For External Module
Enable (1) or disable (0) the Caller ID FSK signal
for an external Caller ID module or a 3rd party
vendor telephone with Caller ID display.
Important:
If voice mail is used, this setting must be
disabled or the system integration codes for
disconnect will be incorrect.
With some earlier software, if a 2500 set (no

Caller ID) is installed, this must be set to "0"
or else incoming callers will not have a talk
path.
Caller ID Name
Determine if an extension user's telephone
should display the Caller ID name.
Caller ID Type
Determine whether the Caller ID type is FSK or
DTMF.
--- Not Used ---
--- Not Used ---
Forwarded Caller ID Display Mode
Determine what the display shows when a
multiline terminal receives a forwarded outside
call.
Disconnect without dial after hooking hold
Determine whether or not to disconnect a held
call when on-hook without any dialing after
hooking-hold.
Electra Elite IPK II
Input Data Default
0 = Disable
0
(Off)
1 = Enable
(On)
1
0 = No
1 = Yes
0 = Disable 1
(No)
1 = Yes
(Enable)
0 = Disable 0
(Off)
1 = Enable
(On)
0 = Disable 1
1 = Enable
0 = FSK 0
1 = DTMF
0 = Calling 0
Extensio
n
Number
(Calling)
1 = External
Caller ID
(Forward)
0 = Normal 0
1 = Disc.
Program 15 : Extension, Basic Setup
Related
Program
11-12-45
11-12-46
15-03-09