Ars/F-Route Table - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use
kinds of order. If the higher priority trunk groups are busy, the next order group will be
used. If a lower priority route is selected, the caller may be notified with a beep tone.
Input Data
Item
No.
01
02
03
04
05
06
Electra Elite IPK II Programming Manual
Program 44 : ARS/F-Route Setup
Program 44-05 : ARS/F-Route Table
ARS/F-Route Table Number
Priority Number
Trunk Group Number
Select the trunk group number to be used for the
outgoing ARS call.
Delete Digits
Enter the number of digits to be deleted from the
dialed number.
Additional Dial Number Table
Enter the table number (defined in Program 44-06)
for additional digits to be dialed.
Beep Tone
Select whether or not a beep is heard if a lower
priority trunk group is used to dial out.
Gain Table Number for Internal Calls
Select the gain table number to be used for the
internal call (defined in Program 44-07).
Gain Table Number for Tandem Connections
Select the gain table number to be used for the
tandem call (defined in Program 44-07).

44-05 : ARS/F-Route Table

to set the ARS/F-Route table. There are 4
Item
Document Revision 1
1~500
1~4
Input Data
0~100, 101~150, 255
0 = No Setting
101~150 = Networking
255 = Extension Call
0~255
(255 = Delete All)
0~1000
0 = Off
1 = On
0~500
0 = No Setting
0~500
0 = No Setting
Default
0
0
0
0
0
0
2 - 399