NEC Electra Elite IPK II Programming Manual page 455

Document Revision 1
Input Data
Item
No.
07
08
09
2 - 420
Item
Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all parties on
a call will hear the voice prompt Recording followed
by a single beep when the extension user initiates
Conversation Record. If disabled, the voice prompt
and beep will not occur. When you disable the
Conversation Record beep, the following voice
prompts do not occur while IPK II In-Mail records the
conversation:
"Recording"
(followed by a beep)
"That mailbox is full"
(if the mailbox message storage capacity is reached)
"You have reached the recording limit"
(if the recorded message is too long)
The Electra Elite IPK II telephone system software
provides an additional Conversation Record beep.
This beep repeats according to the setting of
Program 45-01-06: Voice Mail Integration
Options: Record Alert Tone Interval Time
(0~64800 seconds). To disable the Electra Elite IPK
II telephone system Conversation Record beep,
enter 0 for this option.
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting lamping at the extension associated with the
Subscriber mailbox. For Subscriber Mailboxes, you
should leave this option enabled. For Guest
Mailboxes, you should leave this option disabled.
Auto Attendant Do Not Disturb
(Auto-ATT DND)
Use this option to enable or disable Auto Attendant
Do Not Disturb. When a subscriber enables Auto
Attendant Do Not Disturb, an Automated Attendant
caller will route directly to the mailbox, hear the
greeting, and be asked to leave a message. A
subscriber can also enable Auto Attendant Do Not
Disturb while recording their mailbox greeting.
Electra Elite IPK II
Input Data
0 = No (Disabled) 1 (Yes - Enabled)
1 = Yes (Enabled)
0 = No (Disabled) 1 (Yes - Enabled)
1 = Yes (Enabled)
0 = No (Disabled) 0 (No - Disabled)
1 = Yes (Enabled)
Program 47 : In-Mail
Default