Program 92 : Copy Program; Copy Program - NEC Electra Elite IPK II Programming Manual

Level:
IN
Description
(This program is available only via telephone programming and not through
PC Programming).
Use Program 92-01 : Copy Program to copy the data for one program to
another multiline terminal, port, group, etc. Refer to the following charts to see
which programs can be copied.
Input Data
Item
No.
01
Electra Elite IPK II Programming Manual

Program 92 : Copy Program

Program Number
Item
Source Number
Enter the extension, trunk, group, etc.
from which the data will be copied.
Destination Number (From)
Enter the first extension, trunk, group, etc.
number to which the information is to be
copied.
Destination Number (To)
Enter the last extension, trunk, group, etc.
number to which the information is to be
copied. If the information is only be copied
to one extension, trunk, group, etc., enter
the information entered in the Destination
Number (From) entry.

92-01 : Copy Program

XX-XX
Input Data
In case of Trunk Base :
H
Trunk Port Number 1~8 or 1~200
In case of Trunk Group Base :
H
Trunk Group Number 1~8 or 1~100
In case of Extension Base :
H
Extension Number (up to 8 digits)
In case of Department Group Base :
H
Department Group Number 1~8 or
1~64
In case of DSS :
H
DSS Console Number 1~4 or 1~32
P r o g r a m
92
2 - 573