NEC Electra Elite IPK II Programming Manual page 375

Document Revision 1
3 - 340
Item
No.
07 Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
08 Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls will not print.
09
Extension Number or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0)
to have the SMDR report include extension
names.
10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
11 Walking Toll Restriction Table Number
12 DID Table Name Output
Determine if the DID table name should be
displayed.
13 CLI Output When DID to Trunk
Determine if the CLI output should be displayed
for DID.
14 Date
Determine whether the date should be
displayed on SMDR reports.
This option must be set to "0" if the trunk

name is set to be displayed in Program
35-02-03.
15 CLI / DID Number Switching
Determine if the CLI/DID Number Switching
should be displayed.
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID trunks. If set
to (1), ANI/DNIS trunks can print DNIS digits. If
set to (0) trunk names are printed instead.
17 Print Account Code or Caller Name of
Incoming Call
Determine if SMDR should print Account Code
or Caller Name of Incoming Call.
Item
Program 35 : SMDR Account Code Setup
Electra Elite IPK II
Input Data Default
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1=Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling
Number
0 = Trunk Port
Name
1 = Received
Dialed Number
0 = ACC
1 = CNAME
1
1
1
0
1
0
0
0
0
0
0