NEC Electra Elite IPK II Programming Manual page 26

Electra Elite IPK II
Password
12345678
H
S 4
OW TO
ECTION
To exit the programming mode:
When you are done programming, you must be out of a program's options to exit
(pressing the Answer key will exit the program's option).
1.
2.
3.
Programming
User
Name
47544 necii
tech
0000 ADMIN1
9999 ADMIN2
E P
XIT ROGRAMMING
Press Answer key to exit the program's options, if needed.
Program Mode
Base Service OP1 OP2
Press Speaker. If changes were to the system programming, "Saving System
Data" is displayed.
The display shows "Complete Data Save" when completed and exits the
telephone to an idle mode.
To save a customer's database, a blank Compact Flash (CF) is required. Insert the CF

into the CPUII and, using Program 90-03, save the software to the Compact Flash.
(Program 90-04 is used to reload the customer data if necessary.) Note that a Compact
Flash can only hold one customer database. Each database to be saved will require its
own separate card.
Level
1 (MF) Manufacturer (MF):
All programs
2 (IN) Installation (IN):
All programs in this section not listed below for SA and
SB
3 (SA) System Administrator - Level 1 (SA):
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17,
10-18, 10-22, 12-02, 12-03, 12-04, 15-01, 15-07, 15-09,
15-10, 15-11, 20-16, 21-07, 21-14, 22-04, 22-11, 25-08,
30-03, 32-02, 40-02, 41-02, 41-03, 41-04, 41-05, 41-06,
41-07, 41-08, 41-09, 41-10, 41-11, 41-12, 41-13, 41-14,
41-15, 41-16, 41-17, 41-18, 90-03, 90-04, 90-06, 90-07,
90-18, 90-19
4 (SB) System Administrator - Level 2 (SB):
13-04, 13-05, 13-06
M
ODE
Document Revision 1
Programs at this Level
1 - 3