In-Dhcp Server Setup - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the
CPUII.
Caution! The system must be reset in order for these changes to take affect.
Input Data
Item
No.
01
02
03
04
Feature Cross Reference
J
2 - 20
Item
DHCP Server 0: Disable
Mode
1: Enable
Lease Time Days 0~255
Hour 0~23
Minutes 1~59
--- Not Used ---
0: Single
Number of
Networks
1: Divide Same
Conditions
None
Voice Over Internet Protocol (VoIP)

10-13 : In-DHCP Server Setup

Input Data Default
0 day
0 hour
30 minutes
Network
Program 10 : System Configuration Setup
Electra Elite IPK II
Description
0 Enable or disable the use of the
built-in DHCP Server.
Lease Time of the IP address to a
client.
Note: Pressing the Transfer Key
will increment to the next setting
data.
0 The number of networks to
manage.
With a single network, select
Single.
When dividing and managing the
same network as multiple
networks, select Divide.