NEC Electra Elite IPK II Programming Manual page 465

Document Revision 1
Input Data
Item
No.
04
05
06
07
2 - 430
Item
Message Retention
(Message Retention)
Use this option to determine how long a Subscriber
Mailbox will retain held and saved messages. If a
message is left in a Subscriber Mailbox longer than
this interval, IPK II In-Mail deletes it.
Recording Conversation Beep
(Rec Conv Beep)
Use this option to enable or disable the
Conversation Record beep. If enabled, all parties
on a call will hear the voice prompt Recording
followed by a single beep when the extension user
initiates Conversation Record. If disabled, the voice
prompt and beep will not occur. When you disable
the Conversation Record beep, the following voice
prompts do not occur while IPK II In-Mail records
the conversation:
"Recording"
(followed by a beep)
"That mailbox is full"
(if the mailbox message storage capacity is
reached)
"You have reached the recording limit"
(if the recorded message is too long)
The Electra Elite IPK II telephone system software
provides an additional Conversation Record beep.
This beep repeats according to the setting of
Program 45-01-06: Voice Mail Integration Options:
Record Alert Tone Interval Time (0~64800
seconds). To disable the Electra Elite IPK II
telephone system Conversation Record beep,
enter 0 for this option.
Message Waiting Lamp
(Update MW Lamp)
Use this option to enable or disable Message
Waiting lamping at the extension associated with
the Subscriber mailbox. For Subscriber Mailboxes,
you should leave this option enabled. For Guest
Mailboxes, you should leave this option disabled.
Auto Attendant Do Not Disturb
(Auto-ATT DND)
Use this option to enable or disable Auto Attendant
Do Not Disturb. When a subscriber enables Auto
Attendant Do Not Disturb, an Automated Attendant
caller will route directly to the mailbox, hear the
greeting, and be asked to leave a message. A
subscriber can also enable Auto Attendant Do Not
Disturb while recording their mailbox greeting.
Electra Elite IPK II
Input Data
1~90 days 0 (Indefinite)
0 (Indefinite)
0 = No (Disabled) 1 (Yes - Enabled)
1 = Yes (Enabled)
0 = No (Disabled) 1 (Yes - Enabled)
1 = Yes (Enabled)
0 = No (Disabled) 0 (No - Disabled)
1 = Yes (Enabled)
Program 47 : In-Mail
Default