NEC Electra Elite IPK II Programming Manual page 492

Electra Elite IPK II
Input Data
Key
TIMEOUT
Electra Elite IPK II Programming Manual
Dial Action Table Number
Dial Action Table Action
No.
1 TRF Action - Screened
H
Transfer (1)
(TRF)
2
UTRF Action -
H
3
Unscreened Transfer (2)
(UTRF)
4
REC1 Action - Quick
H
5
Message With Greeting
(3)
6
(REC1)
7
REC2 Action - Quick
H
Message Without
8
Greeting (4)
(REC2)
9
LOGON Action - Log
H
0 Onto Voice Mail (5)
(LOGON)
,
Hang Up Action (6)
H
(HNGUP)
#
GOTO Action - Go to
H
Mailbox (7)
(GOTO)
UND Action - Undefined
H
Routing (0)
(UND)
Additional Data
Digits
H
Use Dial Action Table digits to route an Automated
Attendant call to a specific location (such as an
extension). For example, to set up a TRF Action to route
to extension 305, for digit 3 enter TRF for the Action and
305 for the corresponding Number.
Caller Dialed Digits
H
Use the X option to route an Automated Attendant call
based on digits the caller dials. Each X entry represents
one caller-dialed digit. For example, to set up a TRF
Action to route to any caller dialed extension in the
301'399 range, for digit 3 enter TRF for the Action and
XXX for the corresponding Number.
Ignore Digits
H
Use the I option to represent any digit dialed by the
Automated Attendant caller that IPK II In-Mail ignores
for routing. An example of this is REC action assigned
to the * key in Dial Action Table 1 by default. The Action
is REC2 and the Number is IXXX. This means that a
caller can dial * + any mailbox number to leave a Quick
Message in that mailbox. IPK II In-Mail ignores the first
digit dialed by the caller (*), and routes according to the
next 3 digits dialed.
No Routing
H
Use the N option when you want no Automated
Attendant routing to automatically occur. This can be
used with the LOGON action when you want to prompt
the caller to enter a mailbox number. To do this for the #
key (for example), for the # key enter LOGON for the
Action and N for the corresponding Number. When the
caller dials #, they hear, "Please enter the mailbox
number. Or, to exit, press the pound key."
Pause
H
Use the P option when you want the Automated
Attendant to pause while dialing.
Document Revision 1
01~16
Entry : 0-9, #, and
,
(8 digits max.)
Entry : X
(Entered by pressing LK2)
Entry : I (
Entered by pressing LK3)
Entry : N
(Entered by pressing LK1)
Entry : P
(Entered by pressing LK4)
2 - 457