Program 85 : Hub(8) Lan Setup; Hub(8) Lan Setup - NEC Electra Elite IPK II Programming Manual

Level:
IN
Description
Use
Input Data
Item
No.
01
02
03
04
05
Electra Elite IPK II Programming Manual

Program 85 : HUB(8) LAN Setup

Program 85-01 : HUB(8) LAN Setup
Hub Slot
Hub Port
Item
Auto Negotiation
Link Speed
Half Duplex/Full Duplex
Auto MDI/MDIX
Back Pressure, Half-
Duplex

85-01 : HUB(8) LAN Setup

to define the LAN setup for each slot.
Input Data Default
0 = Enable 0
1 = Disable
0 = 10Mbps 1
1 = 100Mbps
0 = Half 1
1 = Full
0 = MDIX 2
1 = MDI
2 = Auto
0 = Disable 0
1 = Enable
1~24
0~8
Description
When enabled, Link
Speed, Duplex and MDI/
MDIX setting are
negotiated with the other
connected device.
85-01-01 - Disable
85-01-01 - Disable
When 85-01-01 is
enabled, Auto MDI/MDIX
will function. Auto MDI/
MDIX (Media Dependent
Interface / Media
Dependent Interface
Cross-over) enables a
switch port to sense the
appropriate transmit/
receive pairs of an
Ethernet cable.
85-01-01 - Disable,
85-03-01 - Half Duplex
When enabled, a switch
applies back pressure to
a half-duplex ingress port
while an output queue is
congested.
2 - 527
P r o g r a m
85