Location Setup - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-02 : Location Setup to define the location of the installed system.
Input Data
Item
No.
Feature Cross Reference
None
2 - 4
Item
01 Country Code
02 International
Access Code
03 Other Area
Access Code
04 Area Code
05 Trunk Access
Code
Conditions
None
Input Data Default
Dial (up to 4 digits)
0~9, , #
,
Dial (up to 4 digits)
0~9, , #
,
Dial (up to 2 digits)
0~9, , #
,
Dial (up to 6 digits)
0~9, , #
,
Dial (up to 8 digits):
0~9, #,
,
Program 10 : System Configuration Setup
Electra Elite IPK II

10-02 : Location Setup

Description
1 Enter the country code.
- Enter the international access
code.
9 Enter the other area access code
- Enter the local area code.
- Enter the trunk access code digits
required to place an outgoing call.
This is the code which will be
added to the Caller ID information
for incoming trunk calls to allow
the call to dial out if allowed in
20-19-03.
IMPORTANT
Program 10-02-05 is only
supported by telephone
programming. PCPro and WebPro
cannot edit this option.