NEC Electra Elite IPK II Programming Manual page 238

Electra Elite IPK II
Input Data
Feature Cross Reference
J
Electra Elite IPK II Programming Manual
Item
No.
16 Supervise Dial Detection Timer
With the Outgoing Disable on
Incoming Line feature, if dial tone is
not detected after the extension
answers an incoming line, the system
determines the call is unable to
complete and releases the DTMF
receiver.
17 Restriction Digit in Outgoing
Disable on Incoming Line
With the Outgoing Disable on
Incoming Line feature, determine the
number of digits to be dialed before
the call should be disconnected.
18 Reset Dial After Failure of Trunk
Access
19 Do Not Call
Conditions
None
Central Office Calls, Placing
Item
0~64800 (sec)
Digits 0~9
0 = Disable (Off)
1 = Enable (On)
0 = No Service
(Off)
1 = Extended
Common Restriction
(On)
Document Revision 1
Input Data Default
20
4
0
0
Related
Program
15-01-05
21-01-16
21-01-17
15-01-05
21-01-15
21-01-16
99-01-01
15-01-07
2 - 203