Table 1-1 Keys For Entering Data - NEC Electra Elite IPK II Programming Manual

Document Revision 1
U
S 5
SING
ECTION
Once you enter the programming mode, use the keys in the following chart to enter
data, edit data and move around in the menus.
Use this key...
1 - 4
K M
EYS TO OVE
When you want to...
0~9 and Enter data into a program.
,
TRANSFER Complete the programming step you just made (e.g., pressing Enter
on a PC keyboard). When a program entry displays, press
TRANSFER to bypass the entry without changing it.
CONF Delete the entry to the left (e.g., pressing Backspace on a PC
keyboard).
HOLD Delete or clear all characters to the right of the cursor.
Exit one step at a time from the program window currently being
ANSWER
viewed.
For example, if programming item 5 in 15-03, pressing ANSWER
allows you to enter a new option in program 15-03. Pressing
ANSWER again allows you to select a new program in the 15-XX
series. Pressing ANSWER a third time allows you to enter a new
program beginning with 1. Pressing ANSWER one last time brings
you to the beginning program display, allowing you to enter any
program number.
Switch between the different input data fields by pressing
REDIAL
The cursor moves up to the top row of the display. Pressing
again moves the cursor back to the middle row.
Use pre-programmed settings to help with the program entry. These
LINE KEYS
settings vary between programs from LINE 1 = 0 (off) and LINE 2 = 1
(on) to preset values for timers where LINE 1 = 5, LINE 2 = 10, LINE
3 = 15, etc.
For programs with this option, the line key, which currently matches
the programmed setting, lights steady.
The display can also indicate Softkey, which will allow you to select
the values as well (-1 and +1 will step through these pre-programmed
settings.)
LINE KEY 1 Program a pause into an Speed Dialing bin.
LINE KEY 2 Program a recall/flash into an Speed Dialing bin.
LINE KEY 3 Program an @ into an Speed Dialing bin.
A
ROUND IN THE

Table 1-1 Keys for Entering Data

Keys for Entering Data
Electra Elite IPK II
P
ROGRAMS
.
REDIAL
REDIAL
Introduction