System Information Output - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use Program 90-13 : System Information Output to define the output port to be
used as the system information output. The baud rate for the COM port should be set
in Program 10-21-02.
Input Data
Item
No.
01
02
03
Feature Cross Reference
None
Electra Elite IPK II Programming Manual
Program 90 : Maintenance Program
Output Port Type
Indicate the type of connection used to print the
system information.
Destination Extension Number
If the output port type (item 1) is set to CTA,
enter the extension number with the CTA
connection.
Output Command
Dialing 1 from this program sends the system
report to the connected device.
Conditions
None

90-13 : System Information Output

Item
Document Revision 1
Input Data
0 = No Setting
1 = COM port (CPUII)
2 = USB port (CPUII)
3 = LAN Port (CPUII)
4 = CTA/CTU
Extension Number
(Up to 8 digits)
Dial 1 + press HOLD
(Press HOLD key to cancel.)
Default
0
No Setting
-
2 - 553