Connecting System Settings - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Program 50 : Common Channel Interoffice Signaling Service
Level:
IN
Description
Input Data
Item
Item
No.
01 Port Number of Common
Signaling Channel (DTI
only)
02 Common Signaling
Channel Data Speed
Assignment (DTI only)
03 Originating Point Code
(DTI only)
04 Destination Point Code
05 Calling Name Indication
06 CCH Channel Number on
the CCH Package
Assingnment
2 - 462
Use Program 50-02 : Connecting System Settings to define the settings for
each CCIS Route ID.
CCIS Route ID
Specify the Trunk port to send D-channel information.
This program is available for using DTI package.
Assign the baud rate of Common Signaling Channel
on DTI package.
Assign the Point code of own side.
Assign the Point code of destination side on the DTI
link.
Calling name indication will not send to destination
party if switch is turned to Disable.
Program 50 : Common Channel Interoffice Signaling Service

50-02 : Connecting System Settings

Description
Electra Elite IPK II
Route ID 1~8: CCIS via DTI
Route ID 9: CCIS via IAD (IP-CCIS)
Input Data
0~200
0 = 64Kbps
1 = 56Kbps
2 = 48Kbps(1)
3 = 48Kbps (2)
0~16367
0~16367
0 = Disable
1 = Enable
0~4 (0 = No
Setting)
Default
0
1
0
0
1
0