NEC Electra Elite IPK II Programming Manual page 44

Electra Elite IPK II
Item
No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Electra Elite IPK II Programming Manual
For BRI PKG Setup
ISDN Line Number
Item
--- Not Used ---
Logical Port Number
The starting port number of a BRI

line is displayed. Two logic ports are
automatically assigned to a BRI line.
Connection Type
Layer 3 Timer Type
 Each timer value of Layer 3 are set
up for every type using
Program 81-06 (T-Bus)
CLIP Information Announcement
Based on this setting, the system will
include a "Presentation Allowed" (1) or
"Presentation Restricted" (0) in the
Setup message to allow or deny the
Calling Party Number. Program
15-01-04 must also be set to a '1' if this
option is enabled.
--- Not Used ---
--- Not Used ---
Dial Sending Mode
Dial Information Element
(Only when Dialing Sending Mode (10-
03-08) is set for 1 (Overlap Sending)
--- Not Used ---
--- Not Used ---
--- Not Used ---
--- Not Used ---
--- Not Used ---
Document Revision 1
01~08
Input Data
0 = Net Set
1 = For T-Bus (1~200)
2 = For S-Bus (1~256)
0 = Point-to-Multipoint (not
available for Networking)
1 = Point-to-Point
1~5
0 = Disable
1 = Enable
0 = Enblock Sending
1 = Overlap Sending
0 = Keypad Facility
1 = Called Party Number
Default
0
0
1
1
1
2 - 9