System Options For Multiline Telephones - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various

system options for multiline telephones.

Input Data
Item
Item
No.
01
--- Not Used ---
02 Trunk Group Access Key
Operating Mode
Use this option to set the operating
mode of the extension's trunk group
keys. The keys can be for incoming
access, outgoing access or both.
03 BLF Control (DSS Busy Mark)
Set the conditions under which a
Hotline, Reverse Voice Over or DSS
Console key indicates that an
extension is busy. Refer to the
Reverse Voice Over feature for more
information.
04 Retrieve the Line After Transfer
Enable (1) or disable (0) an
extension's ability to answer a call
after it's been transferred, but before
it's answered.
Headset Busy Mode
05
Set the conditions under which a
headset extension is busy to
incoming callers.
06 Preselection Time
When a multiline terminal user
preselects a line key, the system
remembers the preselection for this
interval.
Electra Elite IPK II Programming Manual
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
0 = Not Holding (No Keep)
1 = Holding (Keep)
0 = No
1 = Yes
0~64800 seconds
Input Data
Document Revision 1
Related
Default
Programming
0
1
1
0
5
2 - 151