NEC Electra Elite IPK II Programming Manual page 466

Electra Elite IPK II
Input Data
Item
No.
08
09
10
11
12
Electra Elite IPK II Programming Manual
Item
Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated
Attendant Forced Unscreened Transfer for the
Subscriber Mailbox. If enabled, each Screened
Transfer (TRF) to the extension is converted to an
Unscreened Transfer (UTRF). If disabled,
Screened Transfers from the Automated Attendant
occur normally.
Auto Time Stamp
(Auto Time Stamp)
Use this option to enable or disable Auto Time
Stamp for the Subscriber Mailbox. If enabled, after
the subscriber listens to a message IPK II In-Mail
will announce the time and date the message was
left. Auto Time Stamp will also announce the
message sender (if known).
A subscriber can also enable Auto Time Stamp
from their mailbox.
System Administrator
(System Admin)
Use this option to designate the Subscriber Mailbox
as a System Administrator. This allows the
subscriber to use the options after logging onto
their mailbox.
Dialing Option
(Dialing Option)
Dialing Option provides additional dialing options
for Next Call Routing Mailbox calls (see Next Call
Routing Mailbox below). If enabled, a caller who
accesses the Subscriber Mailbox to leave a
message can dial any of the options in the Next
Call Routing Mailbox's Dial Action Table. If
disabled, the caller can only dial 0 (to use the Next
Call Routing Mailbox's 0 action).
Next Call Routing Mailbox
(Next CR Mbox)
Use this option to assign a Next Call Routing
Mailbox to the Subscriber Mailbox. This provides
callers with additional dialing options while listening
to a Subscriber Mailbox recorded or default
greeting. The digits the caller can dial depends on
the setting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox options.
Document Revision 1
Input Data
0 = No (Disabled) 0 (No - Disabled)
1 = Yes (Enabled)
0 = No (Disabled) 0 (No -Disabled)
1 = Yes (Enabled)
0 = No (Disabled) 0 (No - Disabled)
1 = Yes (Enabled)
0 = No (Disabled) 0 (No - Disabled)
1 = Yes (Enabled)
Call Routing Mailbox 1
Number (1~3 digits) (Call Routing
Mailbox 01)
No entry (entered by
pressing CLEAR) By default, Call
Routing Mailbox
numbers are
01=16.
Default
2 - 431