Mitsubishi Electric MELSEC iQ-R Series User Manual page 632

Error code
(Hexadecimal)
1B03H
1B04H
1B05H
1B0CH
1B0DH
1B0EH
1B0FH
1B10H
1B11H
1B12H
1B13H
1B14H
14 TROUBLESHOOTING
630
14.5 List of Error Codes
Downloaded from ManualsNet.com
Error name Error details and causes
Condition data error An unusable condition operator is set for the set
condition.
[Operation status at error occurrence]
The operation is terminated.
Condition data error • The conditional operator has been [parameter 1 is
greater than parameter 2] with 05H (P1  **  P2).
• The conditional operator has been [parameter 1 is
greater than parameter 2] with 06H (**  P1, P2  **).
[Operation status at error occurrence]
The operation is terminated.
Condition data error The setting value of "address" is outside the setting
range when the condition target is set to "Buffer
memory (1-word/2-word)". (1-word: 0 to 98303, 2-
word: 0 to 98302)
[Operation status at error occurrence]
The operation is terminated.
Condition data error The same axis No. is set in "[Da.24] Simultaneous
starting axis No.1", [Da.25] Simultaneous starting axis
No.2" and [Da.26] Simultaneous starting axis No.3".
[Operation status at error occurrence]
The operation is terminated.
Condition data error The axis No. is set in "[Da.24] Simultaneous starting
axis No.1", [Da.25] Simultaneous starting axis No.2"
and [Da.26] Simultaneous starting axis No.3", that is
larger than the common parameter "[Pr.152] Maximum
number of control axes".
[Operation status at error occurrence]
The operation is terminated.
Condition data error The self axis is set in "[Da.24] Simultaneous starting
axis No.1", [Da.25] Simultaneous starting axis No.2"
and [Da.26] Simultaneous starting axis No.3".
[Operation status at error occurrence]
The operation is terminated.
Condition data error "[Da.23] Number of simultaneous starting axes" is
outside the setting range, or "[Da.23] Number of
simultaneous starting axes" is larger than "[Pr.152]
Maximum number of control axes".
[Operation status at error occurrence]
The operation is terminated.
Illegal data No. The designation of a JUMP destination is executed
currently.
[Operation status at error occurrence]
The positioning data is not executed.
Illegal data No. • The positioning data No. tried to be executed is
outside the ranges of 1 to 600, 7000 to 7004, and
9001 to 9004.
• The designation of a JUMP destination is outside the
ranges of 1 to 600.
[Operation status at error occurrence]
The positioning data is not executed.
No command speed At the start of positioning, a current speed (-1) is set for
the command speed of the positioning data to be
initially executed.
[Operation status at error occurrence]
The operation does not start at positioning start.
No command speed The current speed is set by speed control.
[Operation status at error occurrence]
The operation does not start at positioning start.
No command speed The current speed is set for speed-position or position-
speed switching control.
[Operation status at error occurrence]
The operation does not start at positioning start.
search engine
Remedy
Normalize the block start data.
Normalize the block start data.
Normalize the block start data.
Normalize the block start data.
Normalize the block start data.
Normalize the block start data.
Normalize the block start data.
Normalize the positioning data.
Normalize the positioning data.
Normalize the positioning data.
Normalize the positioning data.
Normalize the positioning data.