Function Block; Signals; Settings; Operation Principle - Hitachi Relion 650 Series Technical Manual

1MRK 511 557-UEN Rev. A
12.10.3

Function block

BLOCK
^IN
D0E13075T201305151403 V1 EN-US
Figure 105: SPGGIO function block
12.10.4

Signals

Table 221: SPGGIO Input signals
Name
BLOCK
IN
12.10.5

Settings

The function does not have any parameters available in Local HMI or Protection and Control IED
Manager (PCM600).
12.10.6

Operation principle

Upon receiving a signal at its input, IEC61850 generic communication I/O functions (SPGGIO)
function sends the signal over IEC 61850-8-1 to the equipment or system that requests this signal. To
get the signal, PCM600 must be used to define which function block in which equipment or system
should receive this information.
12.11 IEC 61850 generic communication I/O functions 16
inputs SP16GGIO
12.11.1

Identification

Function description
IEC 61850 generic communication I/O
functions 16 inputs
12.11.2

Functionality

IEC 61850 generic communication I/O functions 16 inputs SP16GGIO function is used to send up to
16 logical signals to other systems or equipment in the substation.
Technical Manual
SPGGIO
IEC09000237_en_1.vsd
Type Default
BOOLEAN 0
BOOLEAN 0
© 2021 Hitachi Energy. All rights reserved.
Description
Block of function
Input status
IEC 61850 IEC 60617
identification identification
SP16GGIO -
Section 12
Monitoring
D0E7979T201305151403 v1
D0E8288T201305151403 v1
D0E8289T201305151403 v1
D0E8252T201305151403 v1
D0E7992T201305151403 v1
ANSI/IEEE C37.2
device number
-
D0E7982T201305151403 v1
217