Binary Status To Analog Conversion Binstsan; Identification; Functionality - Hitachi Relion 650 Series Technical Manual

1MRK 511 557-UEN Rev. A
Input
status
Invalid
Once started, the counters will internally continue the count as per the previous valid input status
even through a power cycle of the IED.
10.3

Binary status to analog conversion BINSTSAN

10.3.1

Identification

Function description
Binary status signal to analog
conversion
10.3.2

Functionality

The binary status signal to analog conversion BINSTSAN function evaluates the equivalent analog
value for a combination of eight binary input signals that show the status levels of analog quantities.
The output signal value is used for further processing in other functions.
There are three modes which can be used to calculate output signals:
• 1 of n: only one of the inputs can be set to high. If more than one input is high, an error is
detected and the output value is set to the default output.
• Incremental: inputs can go high sequentially and the output value is a sum of the scaled input
values. If the inputs are not going high sequentially, an error is detected as the inputs are invalid
and the output value is set to the default output.
• Summation: one or more inputs are high in a random order and the output is the cumulative sum
of the scaled input values.
Technical Manual
Previous input ModeStsCntSen
status Err
Open Freeze
counters
Closed
Open Keep counting
Closed
(Any) Reset to default
IEC 61850 identification IEC 60617
BINSTSAN
© 2021 Hitachi Energy. All rights reserved.
Input status OPNTIME
before
previous
invalid
- OPNTIME
value frozen
at the time
of detecting
invalid
status
- 0.0
- Time count
from last
valid closed
→ open
status
change
- 0.0
- DefValue
identification
-
Section 10
General calculation
CLSDTIME ALMST CNTWR
S N
0.0 1 1
CLSDTIME 1 1
value frozen
at the time of
detecting
invalid status
0.0 1 1
Time count 1 1
from last valid
open →
closed status
change
DefValue 1 0
GUID-DA82632E-9AA4-48AA-B156-7D9B47B69F62 v1
GUID-24C267F0-E961-4524-B6F5-0AE7A24A1804 v1
ANSI/IEEE C37.2 device
number
-
GUID-78A21286-3731-40C3-9733-1064149C4A0C v1
107