Hitachi Relion 650 Series Technical Manual page 257

1MRK 511 557-UEN Rev. A
Name Values (Range)
Inp3HiHiLimit
Inp3HiLimit
Inp3LoLimit
Inp3LoLoLimit
Inp3SensorMode
Inp4LimitSelect
Inp4HystAbsolute
Inp4HiHiLimit
Inp4HiLimit
Inp4LoLimit
Inp4LoLoLimit
Inp4SensorMode
Inp5LimitSelect
Inp5HystAbsolute
Inp5HiHiLimit
Inp5HiLimit
Inp5LoLimit
Inp5LoLoLimit
Table continues on next page
Technical Manual
Unit
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
1 sensor mode -
3 sensor mode
Disabled -
Hi, HiHi, Lo, LoLo
Hi, Hi-Hi
Lo, Lo-Lo
Hi, Lo
Hi-Hi, Lo-Lo
Hi
Lo
Lo-Lo
0.0 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
1 sensor mode -
3 sensor mode
Disabled -
Hi, HiHi, Lo, LoLo
Hi, Hi-Hi
Lo, Lo-Lo
Hi, Lo
Hi-Hi, Lo-Lo
Hi
Hi-Hi
Lo
Lo-Lo
0.0 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
-99999.9 - 99999.9 -
© 2021 Hitachi Energy. All rights reserved.
Step Default
0.1 100.0
0.1 100.0
0.1 0.0
0.1 0.0
- 1 sensor mode
- Disabled
0.1 10.0
0.1 100.0
0.1 100.0
0.1 0.0
0.1 0.0
- 1 sensor mode
- Disabled
0.1 10.0
0.1 100.0
0.1 100.0
0.1 0.0
0.1 0.0
Description
High alarm value limit above which an
upper limit alarm would be issued for
input 3.
High warning value limit above which an
upper limit warning would be issued for
input 3.
Low value limit below which a lower limit
warning would be issued for input 3.
Lower value limit below which a lower
limit alarm would be issued for input 3.
Selection of one or three sensors for
input 3.
Selection of monitored limits for input 4
Absolute Hysteresis value for input 4
High alarm value limit above which an
upper limit alarm would be issued for
input 4.
High warning value limit above which an
upper limit warning would be issued for
input 4.
Low value limit below which a lower limit
warning would be issued for input 4.
Lower value limit below which a lower
limit alarm would be issued for input 4.
Selection of one or three sensors for
input 4.
Selection of monitored limits for input 5
Absolute Hysteresis value for input 5
High alarm value limit above which an
upper limit alarm would be issued for
input 5.
High warning value limit above which an
upper limit warning would be issued for
input 5.
Low value limit below which a lower limit
warning would be issued for input 5.
Lower value limit below which a lower
limit alarm would be issued for input 5.
Section 12
Monitoring
251