Hitachi Relion 650 Series Technical Manual page 246

Section 12
Monitoring
Name
SR2OPL3
IDCLALL1
IDCLALL2
IDCLALL3
IDOPALL1
IDOPALL2
IDOPALL3
Table 239: Breakdown of input group signals
Name
OPSIGNAL
ALARM
SENSTSOUT
Table 240: CBCOMP Output signals
Name
COMPCLL1
COMPCLL2
COMPOPL3
COMPOPL1
COMPOPL2
COMPCLL3
ALMSTS
LOSCOPSG
The alarm conditions from the individual input channels are bit packed in ALMSTS as follows:
Bit 0
Idle
time
240
Type Default
GROUP
SIGNAL
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
Type Description
REAL Closing/Opening time correction value
BOOLEAN Sensor value out of supervision range, or faulty sensor. See ANSCAL for more
details.
BOOLEAN Sensor is faulty, or communication lost. This signal is used for IEC 61850 purpose
only.
Type
REAL
REAL
REAL
REAL
REAL
REAL
INTEGER
BOOLEAN
Bit 1 Bit 2
Control Temperature
voltage
© 2021 Hitachi Energy. All rights reserved.
Description
- Spare 2 compensation value for opening CB pole L3
0 Idle time (mechanical status) compensation alarm for closing CB
pole L1
0 Idle time (mechanical status) compensation alarm for closing CB
pole L2
0 Idle time (mechanical status) compensation alarm for closing CB
pole L3
0 Idle time (mechanical status) compensation alarm for opening CB
pole L1
0 Idle time (mechanical status) compensation alarm for opening CB
pole L1
0 Idle time (mechanical status) compensation alarm for opening CB
pole L1
Description
Compensation delay for closing CB pole L1
Compensation delay for closing CB pole L2
Compensation delay for closing CB pole L3
Compensation delay for opening CB pole L1
Compensation delay for opening CB pole L2
Compensation delay for opening CB pole L3
Alarm status of compensation input(s)
Loss of enabled compensation signal
Bit 3 Bit 4
Drive Spring charge 1
pressure (analog)
1MRK 511 557-UEN Rev. A
GUID-7C9AD51B-4E0C-4568-A013-B5E7AC8BEE67 v2
PID-7614-OUTPUTSIGNALS v1
GUID-3A8AE04D-B72C-4098-969D-4DF94EB2A55F v1
Bit 5 Bit 6 Bit 7
Spring Spare Spare 2
charge 2 1
(binary)
Technical Manual