Table of Contents
Advertisement
Connector
If you are passing cables through the holes on the base table, see the figures below.
86
Do not remove the M/C cables from the Manipulator.
For environmental conditions regarding space when placing the Controller on the base table,
NOTE
refer to the Robot Controller manual.
When using the Manipulator in the cleanroom, follow the steps below before the installation.
(1) Unpack the Manipulator outside of the cleanroom.
(2) Secure the Manipulator to delivery equipment such as a pallet with bolts so that the
(3) Wipe off the dust on the Manipulator with a little alcohol or distilled water on a lint-
(4) Transport the Manipulator into the cleanroom.
(5) Secure the Manipulator to the base table.
C series Rev.2
66
M/C Cables
Manipulator does not fall over.
free cloth.
C8 Manipulator 3. Environment and Installation
Power Cable
Connector (Straight)
85
Power Cable
Connector (L-shaped)
[unit : mm]
Signal Cable
Connector
80
35
117
Advertisement
Table of Contents
