Table of Contents
Advertisement
1.8 Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain the
Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the nearby
areas.
Location
A
B
C
D
E
F
C series Rev.2
Warning Label
C12 Manipulator 1. Safety
NOTE
To avoid getting hands or fingers caught, fold
the Arm and fix it with a belt or a similar tool
before removing the base mounting screws.
Do not enter the work space when the
Manipulator is operating. It is extremely
hazardous since the Arm may collide and
cause serious safety problems.
Do not touch the current-carrying parts inside
the Manipulator while the power is ON. It
may cause electrical shock.
You may get your hand or fingers caught
when bringing your hand close to moving
parts.
When releasing the brakes, be careful of the
arm falling due to its own weight.
This warning label is attached on the
Manipulator and optional brake release box
as well.
Only authorized personnel should perform
sling work and operate a crane and a forklift.
When these operations are performed by
unauthorized personnel, it is extremely
hazardous and may result in serious bodily
injury and/or severe equipment damage to the
robot system.
175
Advertisement
Table of Contents
